 |
 |
Mini ties
The mini ties can be easily installed and can be fitted either manually or by the specific tool ( code MK002 and MK003). Their maior feature is the buckle directly soldered onto the band, already cut to length for the clamipng.
the mini ties are entirely made in AISI 304 or AISI 316 Stainless steel, particularly resistant in the marine environment.
|
|
 |
Tie band ties
Made of AISI 304 or AISI 316, this tie is suggested for those applications where fastening space is quite reduced.
Its clamping is abtained with a specific tool by punching the band inside the buckle. The obatained fasten has an high strengh level.
|
|
 |
Ball band ties
Made of AISI 304 or AISI 316, this tie is suggested for those applications where fastening speed and reduced space are combined, thanks to the innovating self-locking feature of the buckle, the fasten operation can also be made manually.
|
|
 |
Ladder ties series
These Ties feature a self-locking characteristic and are installed sumply by handpulling without any tool.
Made in AISI 316 stainless steel, also nylon 11 coated if required, they grant high performances on U.V. and corrosionenvironmental conditions.
|
|
 |
Pre-formed stainless steel ties
Entirely made from AISI 301 or AISI 316 stainless steel, the pre-formed ties are easy to use and allow to speed at most the installation times.
The particulary of the buckle directly soldered onto the band and the totally burr free edges on both the buckle and the band assure a safe clamping without damage to the components to be tightened, and a larger tightness on any high reliability clamping.
Particularly suitable for the automotive, they find their widest use is in the homocinetic splices protection casings.
|
|
 |
Omega range ties
This tie range is combining a solid mechanical fasten to a quick and easy fastening operation made by a specific tool (code MK007). Each tie size can hold a range of diameters.
|
|
 |
Fixed diameter ties
Made of AISI 301 or AISI 316 stainless steel, each tie size fastens a specific diameter only and provides a high clamping performance with high standing vibrations levels.
The peculiar mode buckle holds the band, it allows the latter to provide a regular contact to fastened circumference, with best clamping area streght distribution.
|
|
 |
Maxi ties
For Made of AISI 201/301 their use is mainly destined to the " large series" clamping types where the availability of a pre-cut to suitable length tie optimised at most installation times.
The clamping is always carried out with the most suitable among the various buckle types
|
|
 |
Maxi ties series
Made of AISI 301 stainless steel, these ties are mainly used for "large series" applications where, having the exactly needed tie length available grants a considerable time saving.
The peculiar buckle design is allowing its opening andre-closing, garanting the tie a reusable feature.
|
)
)
)
)
)
)
)
)
)